Views: 0 Author: Site Editor Publish Time: 2024-10-09 Origin: Site
1. Reasons for over-counting of fully automatic grain counters
1. Too many particles are stuck or gathered in the hopper, and friction increases when entering the counting tube, resulting in inaccurate counting and over-counting.
2. The counting device in the machine is damaged or contaminated, resulting in deviation in counting, resulting in over-counting.
3. During transportation or use, the vibration of the machine causes damage or loosening of internal parts of the machine, thereby affecting the accuracy of counting and over-counting.
4. The machine has been used for too long, and the machine parts are aged or worn, resulting in reduced counting accuracy and over-counting.
2. Solutions to over-counting of fully automatic grain counters
1. Before using the counting machine, clean the hopper and counting tube to ensure that there is no stuck particle phenomenon.
2. Clean and maintain the counting devices in the machine regularly to prevent contamination or failure.
3. When on standby or stopped, maintain the stable state of the machine to prevent vibration from causing damage to internal parts.
4. Replace machine parts regularly to prevent aging or damage from reducing counting accuracy.
5. When using, it is necessary to reduce collision or vibration, strengthen maintenance and maintenance, and ensure the stability of the machine and the accuracy of counting.
The above are the reasons and solutions for the over-counting of the fully automatic grain counting machine. I hope it will be helpful to you. During use, you should also pay attention to keeping the machine stable, avoid vibration, collision and other phenomena during use, and strengthen maintenance and maintenance to improve the working efficiency and service life of the machine.